Key Features
4-channel digital power amplifier |
D-class Amplifier |
Compact chassis |
Built-in high & low pass filter |
Speaker Level Input |
Signal sensing Turn-on |
Extruded aluminum heat sink design |
2 ohms load capability |
Screw-type terminals |
Amplifier Features
Class D Amplifier | Yes |
Full Range Digital Amplifier | Yes |
Load Capability | 2Ω Stable |
Rated power output (4Ω) | 50W x 4 (4Ω) |
Rated power output | 75W x 4 (2Ω) |
Bridged power output (4Ω) | 150W x 2 |
CEA-2006 Compliant | Yes |
Low-pass Filter | Yes |
High-pass Fliter | Yes |
Switched Mode Power supply | Yes, with Power MOS-FET |
Single Side Terminals | Yes |
Chassis | Extruded aluminum het sink design |
Amplifier-Specifications
Rated power output (4Ω, 14,4V) | 50W x 4 (20Hz ~ 20000Hz, 1%THD) |
Rated power output (2Ω, 14,4V) | 75W x 4 (1000Hz, 1%THD) |
Rated power output (CEA-2006) | 50Watts RMS x 4 at 4 ohms and 1% THD |
Low-pass Filter | 50~200Hz (-24dB/oct) |
High-pass Fliter | 50~200Hz (12dB/oct) |
Bass Boost Circuit | 40Hz, 18dB (B-Channel) |
RCA Input Sensitivity | 0.2 ~ 5V |
Input Impedance | 10kΩ |
Signal to Noise Ratio | 100dB |
Signal to noise ratio (CEA-2006) | 80dBa (Reference: 1 Watt into 4 Ohms) |
Frequency response (+0dB, -1dB) | 20Hz ~ 50000Hz |
Freq. resp. (+0dB, -3dB) (SUB) | 20Hz ~ 200Hz |
Operating voltage | 14.4V (11V ~ 16V allowable) |
Maximum current consumption | 25A |
Dimensions (WxHxD) | 170 x 55 x 187(mm), |
Installation Size (WxHxD) | 170 x 55 x 187 (mm) |
Weight | 1.3kg |